Yealink CP930W-Base - Hybrid UC Meeting

| Call Features | 19
Select Manage > Split All.
Managing Conference Participants
You can manage the conference participants to make the conference more flexible.
1.
During a conference call, select Manage.
2.
Select the desired party, you can do the following:
• Select Far Mute to mute the party. The muted party can hear everyone, but no one can hear the muted party.
• Select Remove to remove the party from the conference call.
Ending a Conference Call
You can end the current conference call at any time.
Press or End Call.
Hybrid UC Meeting
You can create a hybrid UC meeting on the CP930W by different ways.
Creating a Hybrid UC Meeting with Mobile Phone
When you are talking on your mobile phone and want to invite colleagues, you can create a hybrid UC meeting on the
phone.
1.
During the mobile call, active the Bluetooth feature on your mobile phone.
2.
Connect and pair the phone on your mobile phone.
3.
Switch the audio input mode to Bluetooth on your mobile phone.
4.
Select Conf, then enter the desired number to dial out or press Directory to select a contact.
5.
After the second party answers the call, select Conf.
6.
Repeat steps 4-5 to invite more parties (up to 4 parties).
Creating a Hybrid UC Meeting with PC
When you are talking with your contact on the PC and want to invite colleagues, you can create a hybrid UC meeting
on the phone.
1.
Connect the phone to a PC using a micro USB cable.
2.
Select Hold > New Call.
3.
Enter the desired number to dial out or press Directory to select a contact.
4.
After the second party answers the call, select Conf.
5.
Repeat steps 2-4 to invite more parties (up to 4 parties).
Creating a Hybrid UC Meeting with Mobile Phone and PC
You can create a hybrid UC meeting on the phone with mobile phone and PC simultaneously.
1.
Connect and pair the phone on your mobile phone.
2.
Connect the PC to your phone by using the micro USB cable.
3.
Place a call using the softphone on the PC.
4.
Do the following to place a mobile call over Bluetooth on the phone.
a) Select Hold > New Call.
b) Select Switch to choose the Mobile Account.
c) Enter the desired number.
d)
Select Send or .