Example for IP Address USING HTTPS: https://192.168.1.10/prov
Enter Auto Provisioning username and password into Username and Password fields.
■
If you choose to use server type TFTP enter tftp:// followed by Hostname or IP
Address
Example for Hostname: tftp://voip.bicomsystems.com
Example for IP Address: tftp://192.168.1.10
Click on Confirm button.
■
Click on Autoprovision Now button.
■
A pop up window will show up, click on OK button to confirm your action.
■
You'll have to wait couple of seconds for the configuration to be updated. NOTE: Do not power
■
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
■
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Using TLS
NOTE: If you choose to use HTTPS as a protocol for registering your phone:
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
■
Enter username and password and press Confirm button. NOTE: Factory default login
■
details are username: admin and password: admin.
Click on Security tab and go to Trusted certificates and disable the option Only Accept
■
Trusted Certificates.
To Next Page
Loading...
