Yealink CTP18-STD User Manual

3
Note:
The CTP18 supports 48V/0.27A power supply.
Make sure that you connect the CTP18 to the endpoint.Otherwise, the
CTP18 may not work properly.
- For VCS/MeetingEye endpoints:
- For MeetingBar endpoints running in Teams version:
- For MeetingBar endpoints running in Zoom version:
Pair the CTP18 with endpoint
2
Enter the endpoint IP address and PIN code according to the on-screen prompts
in the CTP18, then the system will be automatically paired with the CTP18.
Method 3. Connect the CTP18 with endpoint Wirelessly
(It is only applicable to VCS endpoints and MeetingEye endpoints)
Reset
MAC
SN
7.5m
Sign into the same Microsoft account on both CTP18 and the endpoint, then
enter the PIN code according to the on-screen prompts, after that the system
will be automatically paired with the CTP18.
Enter the IP Address(which you can obtain on the endpoint interface), then the
system will be automatically paired with the CTP18.
After connecting the CTP18 with endpoint wirelessly, you can control the
endpoint on CTP18.
Note : If the system has a YMS or other account logged in, the IP address show
in the more settings; if not, the IP address show in the monitor idle screen.

Yealink CTP18-STD Specifications

General

Brand	Yealink
Model	CTP18-STD
Category	Touch Panel
Language	English