What to do if there is no content displayed on the second display with Yealink Conference System?
If you are not seeing content on the second display, first make sure that both displays are securely connected to the HDMI ports on the back of the MCore/Mini-PC. Also, verify that the Dual Monitor mode is enabled. If the issue persists, try restarting the device; after restarting, it will automatically launch the Teams Room Systems app.
Why I cannot control the camera on my Yealink MVC Conference System?
If you cannot control the camera of your Yealink Conference System, it might be because the tracking mode is enabled. To regain manual control, enable the manual control mode. Refer to 'Enabling Manual Control Mode' for instructions.
How to fix the issue when the System Camera of Yealink MVC300/MVC300 is not available?
If the system camera of your Yealink MVC300/MVC300 is not available, check whether you have set the UVC30 camera as the content camera.
Why is the room not enabled for Teams meetings on my Yealink MVC Conference System?
To use Teams meetings on your Yealink Conference System, you must first enable Teams meeting mode on your system.
What to do if there is no content displayed on the second display of my Yealink MVC?
If no content appears on the second display, verify that both displays are securely connected to the HDMI ports located on the rear of the MCore. Also, make sure that the Dual Monitor mode is activated within the Device settings. If the issue persists, try restarting the device.
General| Brand | Yealink |
|---|---|
| Model | MVC Ⅱ Series |
| Category | Conference System |
| Language | English |
To Next Page
