User guide
21
Procedure
Do one of the following:
• Press , or press Accept or Answer
• Press the Speakerphone key
• If a headset is connected, press Accept or the HEADSET key
Answering a call when in a call
You can answer a call when there is already an active call on your phone.
When you are in an active call and an incoming call arrives on the phone, a call waiting tone beeps, and the incoming call information is displayed.
Procedure
1. Press the down navigation key to select the incoming call
2. Select Accept or Answer
Results
The active call is placed on hold, and the incoming call becomes active.
You can disable the call waiting feature to reject the incoming call automatically during a call.
Answering a call automatically
When the handset is placed in the charger, you can simply answer the incoming calls by picking up the handset from the charger without pressing
the Off-hook key.
Procedure
1. Go to OK > Settings > Telephony > Auto Answer
2. Press Change to select the Auto Answer check box (the default status is checked)
Disabling call waiting
If the call waiting feature is disabled, when there is already a call, the new incoming call will be rejected automatically.
Procedure
1. Go to OK > Call Features > Call Waiting
2. Disable call waiting
3. Confirm the action
Switching among the receiver, handsfree and headset modes
You can select the desired mode before placing a call, or can alternate among receiver, handsfree, and handset modes during a call. You can place a
call using the following call modes:
• Receiver mode—pressing the Off-hook key to dial out
• Handsfree mode—pressing the Speakerphone key to dial out
• Headset mode—connecting a standard 3.5mm headset
To Next Page
Loading...
