Yealink SIP-T2 Series

Getting Started
5
Common CFG file contains configuration parameters which apply to phones with the
same model, such as language and volume.
The following figure shows a portion of the common CFG file:
The partial parameters in the Common CFG file are described as follows:
####################################################
## Common CFG File ##
####################################################
#!version:1.0.0.1
##File header "#!version:1.0.0.1" cannot be edited or deleted, and must be placed in
the first line. This template file is applicable to SIP-T28P/T26P/T22P/T20P IP phones running
firmware version 72 or later. For more information on configuration parameters, refer to
Yealink_SIP-T2_Series_IP_Phones_Auto_Provisioning_Guide. ##
######################################################
## Hostname ##
######################################################
network.dhcp_host_name =
######################################################
## PPPOE ##
######################################################
network.pppoe.user =
network.pppoe.password =
The line beginning with “#” is considered to be a comment.
The file header “#!version:1.0.0.1” is not a comment and must be placed in the
first line. It cannot be edited or deleted.