Yealink SIP-T2 Series - Page 22

Yealink IP Phones Auto provisioning Guide
12
######################################################
## Account5 Basic Settings (except SIP-T20P Model) ##
######################################################
account.5.enable =
account.5.label =
account.5.display_name =
account.5.auth_name =
account.5.user_name =
account.5.password =
account.5.outbound_proxy_enable =
account.5.outbound_host =
account.5.outbound_port =
account.5.sip_listen_port =
account.5.transport =
######################################################
## Failback ##
######################################################
account.5.reregister_enable =
account.5.naptr_build =
account.5.fallback.redundancy_type =
account.5.fallback.timeout =
account.5.sip_server.1.address =
account.5.sip_server.1.port =
account.5.sip_server.1.expires =
account.5.sip_server.1.retry_counts =
account.5.sip_server.1.failback_mode =
account.5.sip_server.1.failback_timeout =
account.5.sip_server.1.register_on_enable =
account.5.sip_server.2.address =
account.5.sip_server.2.port =
account.5.sip_server.2.expires =
account.5.sip_server.2.retry_counts =
account.5.sip_server.2.failback_mode =
account.5.sip_server.2.failback_timeout =
account.5.sip_server.2.register_on_enable =