Yealink SIP-T2 Series - Page 26

Yealink IP Phones Auto provisioning Guide
16
#Configure the access URL of the firmware file.
firmware.url =
#Configure the access URL of configuration files.
auto_provision.server.url=
Note: The following configurations are defined to be bundled together. If a user modifies
one of the configurations in a group via web user interface or phone user interface, the
other configurations in the group can also be saved to the MAC-local.cfg file(if the
configuration value is blank, write ”%NULL%” into the configuration) in addition to the
modified configuration.
#Group1: Configure memory key.
memorykey.X.line =
memorykey.X.value =
memorykey.X.pickup_value =
memorykey.X.type =
memorykey.X.xml_phonebook =
#Group2: Configure line key.
linekey.X.line =
linekey.X.value =
linekey.X.pickup_value =
linekey.X.type =
linekey.X.xml_phonebook =
linekey.X.label =
#Group3: Configure programable key.
programablekey.X.type =
programablekey.X.line =
programablekey.X.value =
programablekey.X.xml_phonebook =
programablekey.X.history_type =
programablekey.X.label =