Yealink SIP-T2 Series - Page 32

Yealink IP Phones Auto provisioning Guide
22
office_number=”” specifies the office number of the contact.
mobile_number=”” specifies the mobile number of the contact.
other_number=”” specifies the other number of the contact.
line=”” specifies the line for the contact.
ring=”” specifies the ring tone for the contact.
group_id_name=”” specifies the group you want to add the contact to.
4. Specify the values within double quotes.
5. Save the change.
After editing the local contact template file, upload it to the provisioning server and
then specify the access URL in configuration files.
The following shows an example of a local contact file used for IP phones:
<root_group>
<group display_name="All Contacts" ring=""/>
<group display_name="Family" ring="Resource:Ring1.wav"/>
<group display_name="Friend" ring="Auto"/>
</root_group>
<root_contact>
<contact display_name="Mary" office_number="123" mobile_number="456"
other_number="2201" line="0" ring="Auto" group_id_name="Family"/>
<contact display_name="Damy" office_number="124" mobile_number="789"
other_number="2202" line="1" ring="Resource:Ring2.wav"
group_id_name=""/>
<contact display_name="Jack" office_number="125" mobile_number="234"
other_number="2203" line="2" ring="Custom:lin.wav"
group_id_name="Family"/>
<contact display_name="Ada" office_number="8800"
mobile_number="1234" other_number="0000" line="0" ring="”
group_id_name="”/>
</root_contact>
####################################################
## Configure the access URL of the local contact file ##
####################################################
local_contact.data.url =
For example, enter “tftp://192.168.1.100/contact_list.xml” in the “local_contact.data.url =”
field. During the auto provisioning process, the phone connects to the provisioning
server “192.168.1.100”, and downloads the contact file “contact_list.xml”.