Yealink SIP-T23 User Manual

Getting Started
5
The following figure shows a portion of the common CFG file:
The partial parameters in the Common CFG file are described as follows:
####################################################
## Common CFG File ##
####################################################
#!version:1.0.0.1
##File header "#!version:1.0.0.1" cannot be edited or deleted, and must be placed in
the first line. This template file is applicable to SIP-T28P/T26P/T23 (P/G)
/T22P/T21P/T20P/T19P/T48G/T46G/T42G/T41P IP phones running firmware version 72 or
later. For more information on configuration parameters, refer to
Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide . ##
######################################################
## Hostname ##
######################################################
network.dhcp_host_name =
######################################################
## PPPoE(Except T41P/T42G Models) ##
######################################################
network.pppoe.user =
network.pppoe.password =
######################################################
## Network Advanced ##
######################################################
##It enables or disables the PC port.0-Disabled,1-Auto Negotiation.
The line beginning with “#” is considered to be a comment.
The file header “#!version:1.0.0.1” is not a comment and must be placed in the
first line. It cannot be edited or deleted.

Yealink SIP-T23 Specifications

General

Brand	Yealink
Model	SIP-T23
Category	IP Phone
Language	English