2
E
N
G
L
I
S
H
Startup
3. Connect the network and power, as shown below:
Internet
a. AC Power Option
b. PoE (Power over Ethernet) Option
Note: If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the Ethernet
cable and hub/switch are PoE compliant.
Power Adapter
(DC 5V)
PC Connection
(Optional)
PC Connection
(Optional)
IEEE 802.3af compliant
PoE Hub/Switch
You have two options for network and power connections. Your system administrator will advise
you on which one to use.
After the IP phone has been connected to the
network and supplied with power, it automatically
begins a process of initializing itself on the network.
After that, you can begin to configure the phone via
web user interface or phone user interfafce.
To Next Page
Loading...
