Yealink SIP-T2XP - Configuring a TFTP Server; Preparing a Root Directory

Getting Started
11
account.3.sip_server.2.register_on_enable =
######################################################
## Account4 Basic Settings (for SIP-T28P/T48G/T46G models) ##
######################################################
account.4.enable =
account.4.label =
account.4.display_name =
account.4.auth_name =
account.4.user_name =
account.4.password =
account.4.outbound_proxy_enable =
account.4.outbound_host =
account.4.outbound_port =
account.4.sip_listen_port =
account.4.transport =
######################################################
## Failback ##
######################################################
account.4.reregister_enable =
account.4.naptr_build =
account.4.fallback.redundancy_type =
account.4.fallback.timeout =
account.4.sip_server.1.address =
account.4.sip_server.1.port =
account.4.sip_server.1.expires =
account.4.sip_server.1.retry_counts =
account.4.sip_server.1.failback_mode =
account.4.sip_server.1.failback_timeout =
account.4.sip_server.1.register_on_enable =
account.4.sip_server.2.address =
account.4.sip_server.2.port =
account.4.sip_server.2.expires =
account.4.sip_server.2.retry_counts =
account.4.sip_server.2.failback_mode =
account.4.sip_server.2.failback_timeout =
account.4.sip_server.2.register_on_enable =