About This Guide
v
This guide is intended for administrators who need to properly configure, customize,
manage, and troubleshoot the IP phone system rather than end-users. It provides
details on the functionality and configuration of IP phones.
Many of the features described in this guide involve network settings, which could affect
the IP phone’s performance in the network. So an understanding of IP networking and a
prior knowledge of IP telephony concepts are necessary.
This guide covers SIP-T28P, SIP-T26P, SIP-T22P and SIP-T20P IP phones. The following related
documents are available:
Quick Start Guides, which describe how to assemble IP phones and configure the
most basic features available on IP phones.
User Guides, which describe the basic and advanced features available on IP
phones.
Auto Provisioning Guide, which describes how to provision IP phones using the
configuration files.
<y0000000000xx>.cfg and <MAC>.cfg template configuration files.
IP Phones Deployment Guide for BroadSoft UC-One Environments, which describes
how to configure BroadSoft features on the BroadWorks web portal and IP phones.
For support or service, please contact your Yealink reseller or go to Yealink Technical
Support online: http://www.yealink.com/Support.aspx.
The information detailed in this guide is applicable to firmware version 73 or higher. The
firmware format is like x.x.x.x.rom. The second x from left must be greater than or equal
to 73 (e.g., the firmware version of SIP-T28P IP phone: 2.73.0.40.rom). This administrator
guide includes the following chapters:
Chapter 1, “Product Overview” describes the SIP components and SIP IP phones.
Chapter 2, “Getting Started” describes how to install and connect IP phones and
the configuration methods.
Chapter 3, “Configuring Basic Features” describes how to configure the basic
features on IP phones.
Chapter 4, “Configuring Advanced Features” describes how to configure the
To Next Page
Loading...
Need help?
General