Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
267
Web UI
Dsskey > Programmable Key > Type
Parameter
programablekey.X.history_type
[1]
<y0000000000xx>.cfg
Description
It configures the history type of programmable key.
Permitted
Values
0-Local History
1-Network CallLog (only appear when "bw.enable=1" and "bw.xsi.call_log.enable=1")
Default
0
Web UI
Dsskey > Programmable Key > Line
Parameter
programablekey.X.line
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the programmable key feature.
Permitted
Values
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0, 1-16;
T53W/T53/T43U/T42U/T42S/T42G: 0, 1-12;
T41P/T41S/T27G: 0, 1-6;
T33P/T33G: 0, 1-4;
T40P/T40G/T23P/T23G: 0, 1-3;
T31P/T31G/T31/T21(P) E2: 0, 1-2;
CP920: 1, 101, 102.
0-All (it is configurable only when "features.fwd_mode" is set to 1 (Custom) and "pro-
gramablekey.X.type" is set to 2 (Forward)).
1-Line 1
2-Line 2
…
16-Line 16
101-PSTN1
102-PSTN2
Default
1
Supported
Devices
All phones except T30P/T30/T19(P) E2
Web UI
Dsskey > Programmable Key > Line
Parameter
programablekey.X.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some programmable key features.
For example, when you assign the Speed Dial to the programmable key, this parameter is used to spe-
cify the contact number you want to dial out. It is also used to specify the contact number with the
DTMF sequence. The contact number and DTMF sequence are separated by commas.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Dsskey > Programmable Key > Value
Parameter
programablekey.X.label
[1]
<y0000000000xx>.cfg
To Next Page
Loading...
Need help?
General
