Yealink SIP-T31P

Configuration Parameters
520
Default
0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P) E2/CP920, X=1.
Broadsoft Flexible Seating
Parameter
account.X.flexible_seating.enable
[1]
<MAC>.cfg
Description
It enables or disables the flexible seating feature.
Note: For the host, it works only if “account.X.hoteling.enable” and “account.X.acd.enable” are set to 0
(Disabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.hoteling.mode
[1]
<MAC>.cfg
Description
It configures the hoteling mode.
Permitted
Values
0-Disabled
1-Hoteling
2-Flexible Seating Host
3-Flexible Seating Guest
Default
0
Parameter
account.X.hoteling.pin
[1]
<MAC>.cfg
Description
It configures the flexible seating PIN.
Permitted
Values
String
Default
Blank
Parameter
features.homescreen_softkey.hoteling.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the Flexible Seating soft keys such as GuestIn or
GuestOut on the idle screen.
Note: It works only if “account.X.flexible_seating.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
bw.flexible_seating.remember_password.ldap.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to encrypt and store the LDAP user credentials when using flexible
seating feature.
Note: It works only if "bw.enable" and “account.X.flexible_seating.enable” are set to 1 (Enabled). If you
disable this feature after enabling it, all the saved user credentials are cleared.
Permitted
Values
0-Disabled
1-Enabled