EasyManuals Logo

Yealink SIP-T31P Administrator's Guide

Yealink SIP-T31P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #287 background imageLoading...
Page #287 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
283
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.hold
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the hold state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.held
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the held state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.conferenced
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the conference state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.dialtone
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the dial tone (no numbers entered)
state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.dialing
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the dialing state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
[1]
X is the soft key ID. X=1-10.

Table of Contents

Other manuals for Yealink SIP-T31P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31P and is the answer not in the manual?

Yealink SIP-T31P Specifications

General IconGeneral
Resolution132 x 64 pixels
Network10/100 Mbps Ethernet
PoEYes
PoE ClassClass 2
SIP Accounts2
Wall MountableYes
Local Phonebook1000 entries
HD VoiceYes
Display2.3-inch graphical LCD
Voice CodecsG.722, G.729AB, G.726, iLBC
Headset SupportYes
Protocols SupportedSIP
Power SupplyOptional 5V/600mA power adapter

Related product manuals