Name: Yealink SIP-T31P
Brand: Yealink
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Recovery Mode on Yealink IP phones

You can view the syslog of the TFTP server to check if the W80DM/W80B downloads the firmware

successfully as shown below:

4. Find the current IP address of the device on the DHCP server in the list of registered DHCP clients.

For W90DM/W90B

For the W90DM/W90B, there is no screen to show information for you. The W90DM/W90B uses

192.168.0.23 as its default IP address, so you need to configure a static IP address for your local PC

where you have the TFTP server installed.

Procedures:

1. Configure the static IP address on your local PC.

It must be configured as below:

Other manuals for Yealink SIP-T31P

Questions and Answers:

Need help?

Do you have a question about the Yealink SIP-T31P and is the answer not in the manual?

General