Name: Yealink SIP-T31P
Brand: Yealink
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Recovery Mode on Yealink IP phones

Using Recovery Mode and Runing Backup

System on Yealink IP Phones

This section introduces how to enter recovery mode and run the backup system on Yealink IP phones

step by step.

For Dual System Devices

This section is only applicable to SIP phone series including SIP-T42U, SIP-T43U, SIP-T46U, SIP-T48U,

SIP-T57W, SIP-T54W, SIP-T53W, SIP-T53, SIP-T53C, and VP59.

This feature can only be supported on new factory phones running firmware version 86 or later.

Procedures

1. Long press (Speakerphone key) and reconnect the power adapter to trigger the recovery

mode. Do not release until the recovery mode wizard appears on the phone LCD screen.

2. Press 1 to run the backup system.

Using Recovery Mode on Yealink IP Phones

(HTTP Server)

This section introduces how to perform recovery mode using the HTTP server on Yealink IP phones step

by step.

For SIP Phone Series

This section is only applicable to SIP phone series including SIP-T27G, SIP-T30, SIP-T30P, SIP-T31,

SIP-T31P, SIP-T31G, SIP-T33P, SIP-T33G, SIP-T41S, SIP-T42S, SIP-T46S, SIP-T48S, SIP-T58A,

CP960, and CP920.

This feature can only be supported on new factory phones running firmware version 86 or later.

Procedures

Other manuals for Yealink SIP-T31P

Questions and Answers:

Need help?

Do you have a question about the Yealink SIP-T31P and is the answer not in the manual?

General