EasyManuals Logo

Yealink SIP-T32G User Manual

Yealink SIP-T32G
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Getting Started
15
2. Enter the parameters: IP, subnet mask, default gateway, primary DNS, second DNS
in the corresponding fields.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE
mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP
negotiation to obtain the IP address. Contact your system administrator for the PPPoE
username and password.
To configure PPPoE via phone user interface:
1. Press Menu->Setting->Advanced Settings (password: admin) ->Network->WAN
Port->PPPoE IP Client.
2. Enter the username and password in the corresponding fields.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready to use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to Account Management on page 50.
Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about these
parameters, contact your system administrator.

Other manuals for Yealink SIP-T32G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T32G and is the answer not in the manual?

Yealink SIP-T32G Specifications

General IconGeneral
Keypad number of keys32
SpeakerphoneYes
Voice codecsG.711, G.722, G.723.1, G.726
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Touchscreen-
Display resolution400 x 240 pixels
Display number of colors262144 colors
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
BluetoothNo
Security algorithms802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)4 W
Operating relative humidity (H-H)10 - 95 %
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals