Placing a Call
You can place a call with the Yealink Desktop IP Phones in any of the following ways:
• Lift the handset from the base and enter the phone number using the dial pad, then press the Send
softkey.
• Enter the number using the dial pad, then press the Send softkey to talk on Speakerphone or pick up the
handset at any time.
• Press the RD (redial) button for a list of recent calls, select the number you wish to dial using your
Navigation buttons, then press Send softkey.
• If using a headset, press the HEADSET button, dial the desired telephone number, then press the Send
softkey.
Dialing
• To dial an internal extension, dial the extension then press Send. (Ex. 1001 > Send)
• To dial a local call, dial the seven-digit number.
• To dial long distance, dial the ten-digit number (+1 is not necessary with our VoIP system).
• International dialing has been blocked by default.
Answering a Call
You can answer a call using the handset, speakerphone or a headset.
• Pick up and speak into the handset while the phone is ringing.
• Press the Answer soft key.
• To use the speakerphone, press the button to activate.
• To use a headset, press the HEADSET button.
To answer a second call while on a call:
• Press the Answer soft key. The original caller will be placed on Hold automatically.
To return to the original caller, there are two options:
• Press the Swap button. The current call will be placed on Hold automatically.
• Press the LINE DISPLAY button for the call on hold. This will pick up the line and place the other call on
hold automatically.
To Next Page
Loading...
