Follow the below instructions below to connect and activate your new phone.
When plugging in your Yealink phone, every
port has a specific purpose. If the ethernet cord
is plugged into the wrong place, your phone
will not function properly.
1) Plug the Ethernet cord into the phone first (be sure to use the Internet port and not the PC
port).
2) Make sure the other end is connected to your Internet router.
3) Plug the power cord into the DC5V port on the phone.
4) Complete a test call from your new phone to 813-906-6006 to confirm your phone is ready
for use.
If it is not possible to plug your phone into the router, use the
following instructions to connect to your Wi-Fi.
1) Open the Menu and go to the Basic menu option.
2) Arrow down until you see Wi-Fi. Press Enter.
3) Make sure Wi-Fi is On. If it is Off, press Switch until it is turned on, then Save.
4) Click on Available Networks.
5) Choose Connect on your home Wi-Fi network.
6) Enter your home Wi-Fi Password, then Connect.
7) Complete a test call from your new phone to 813-906-6006 to confirm your phone is ready
for use.
Need extra help? Checkout the How-to video on our
website for connecting your Wi-Fi connection.
https://televoips.com/our-clients/support/yealink-training-videos/
Yealink T54W User Guide: https://televoips.com/wp-content/uploads/2019/12/Yealink-54W.pdf
To Previous Page
Loading...
Need help?
General
