Yealink VP530 Quick Reference Guide

Press to mute the microphone during a call. Press it again to un-mute the call.
Call Mute/Un-mute
1. To place a call on hold:
Press the Hold soft key during an active call.
2. To resume the call, do one of the following:
If there is only a call on hold, Press the Resume soft key.
If there is more than one call on hold, tap the desired one and press the Resume soft key.
Call Hold/Resume
Quick Reference Guide (V70.0)
www.yealink.com
Copyright 2012 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
For more information, refer to the User Guide available online at: http://www.yealink.com/index.php/Support/
Ring Tones
1. Tap Menu->Basic->Sound->Ring Tones.
2.
Press or to select the desired ring tone.
3. Press the Set Ring Tones soft key to accept the change.
Call Transfer
Call Forward
Call Conference
You can transfer a call in the following ways:
Blind Transfer
1. Press the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer the call to.
3. Press the Transfer soft key.
Semi-Attended Transfer:
1. Press the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer the call to, and then press or the Send soft key.
3. Press the Transfer soft key when you hear the ring-back tone.
Attended Transfer:
1. Press the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer the call to, and then press or the Send soft key.
3. Press the Transfer soft key when the second party answers the call.
1. Tap Menu->Call Feature->Call Forward.
2. Select the desired forward type:
Always Forward------------Incoming calls are forwarded unconditionally.
Busy Forward---------------Incoming calls are forwarded when the phone is busy.
No Answer Forward-------Incoming calls are forwarded when the phone is not answered after a
preset time period.
3. Enter the number you want to forward the call to. For No Answer Forward, enter the ring time to
wait before forwarding.
1. Press the Conference soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conference soft key again when the second party answers. All parties are now in the
conference.
4. Hang up the call to disconnect all parties.
Note: You can split the conference call into two individual calls by tapping the Split icon.

Yealink VP530 Specifications

General

Keypad number of keys	27
Headset connectivity	2.5 mm
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	- entries
Number of VoIP accounts	4
Video codecs	H.264, H.263
Video capturing speed	30 fps
Video capture resolution (max)	720 x 480 pixels
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
Front camera resolution (numeric)	2 MP
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	10 W
Operating relative humidity (H-H)	10 - 95 %
Compatible memory cards	SD
Compliance industry standards	IEEE 802.3af
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Silver
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	89 mm
Width	286 mm
Height	45 mm
Weight	1200 g