EasyManuals Logo

Yealink W56B How To Configure

Yealink W56B
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2/28/2019 Provisioning a Yealink DECT W52P/W56P with the 3CX v15
https://www.3cx.com/sip-phones/yealink-dect-w52p/ 1/4
How to configure Yealink W52P/H, W56P/H, W60P/B
for 3CX
This guide applies to v15 SP4 and higher.
On this topic
How to configure Yealink W52P/H, W56P/H, W60P/B for 3CX
Supported Models: Yealink DECT series and Handsets
Base Station
Handset Station
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the Yealink Dect system
Step 3: Provisioning a Yealink WP station
Remote STUN
SBC
Step 4: Registering the handset
Known Limitations
Supported Models: Yealink DECT series and Handsets
Base Station
● Yealink W52P
● Yealink W56P
● Yealink W60P/B
Handset Station
● Yealink W52H
● Yealink W53H

Other manuals for Yealink W56B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W56B and is the answer not in the manual?

Yealink W56B Specifications

General IconGeneral
TypeDECT Cordless Phone
Display2.4 inch color display
Audio QualityHD Voice
RangeUp to 300 meters outdoors, 50 meters indoors
Power SavingYes
Number of Simultaneous Calls2
Handset Selection for Receiving CallYes
HandoverYes
PoE SupportYes
Caller IDYes
Call WaitingYes
Conference CallYes
BatteryLi-ion battery
Weight120 grams (handset)
DECT StandardsDECT 6.0
Number of HandsetsUp to 5
Audio CodecG.722, G.711
Base Station Ethernet Ports1 x 10/100 Mbps
ConfigurationWeb-based configuration
Headset Jack3.5mm
Power SupplyAC 100-240V
Weight (Handset)120g
Frequency Bands1.88GHz - 1.90GHz
Frequency Band1.88GHz - 1.90GHz

Related product manuals