Accessing the Web User Interface
1. Find the current IP address of the device on the DHCP server in the list of
registered DHCP clients.
2. Open a web browser on your computer, enter the IP address into the
address bar (for example, "https://192.168.0.10" or "192.168.0.10"), and
then press the
Enter
.
3. Enter the user name (default: admin) and password (default: admin) in the
login page and click
Login
.
Security Center
Our product contains some source code that may be used and modied by
anyone and everyone under the GNU Public License (GPL), provided they, in
turn, make it available to everyone else with the same licensing agreement.
Please visit https://support.yealink.com/ or scan the QR-code below and go
to
Help Desk > Open Source Software of Yealink IP Phones
for the original
GPL license and the source code of components licensed under GPL and
used in Yealink products.
If you want to deploy the system through the web page, you can log in to the web page in
the following ways. For more information, please refer to the
Admin Guide
.
To Next Page
Loading...
