Yealink W76P Setup Instructions

7
Ready to use
Congratulations, your phone is now ready to use.
Provisioning successful.
a. The following screen indicates that the device has been
provisioned successfully.*
b. You will know provisioning has been successful if you can
see your username and menu options displayed on the screen
by pressing .
*Note: If you receive an error, the phone may still be provisioning – wait 2 minutes. If successful,
the phone will reboot, indicated by the Network and Phone LEDs on the base turning o.
If you enter your details incorrectly, you will be prompted to re-enter your details.
Provision Successful
6
Handset
Username
Menu Options
So Keys
Navigation Cluster
Red End Call Key
Keypad
Base
Phone LED
Network LED
Power LED
For more info, guides & FAQs visit
hps://one.nz/one-business-with-webex/help
or scan the QR code

Yealink W76P Specifications

General

Mounting	Desk/Wall
Device lock	Yes
Handset type	Wireless handset
Product type	IP mobile phone
Product color	Gray
Wi-Fi	-
Networking standards	IEEE 802.1af
Ethernet LAN data rates	10, 100 Mbit/s
Frequency band	1.9 GHz
Lines quantity	20 lines
Phonebook capacity	1000 entries
AC adapter input voltage	100 - 240 V
Number of function keys	6
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	- pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Base dimensions	130 x 100 x 25.1 mm
Handset dimensions (WxDxH)	175 x 53 x 20.3 mm