How to Connect Trixbox to NeoGate TA FXS Gateway
7/15
Figure 6. Edit Dial Pattern Template
Step 4. Edit the FXS port
Path: Gateway→FXS Port List→FXS Port List
Figure 7. Edit the FXS Port
Number: the extension number as the one you created on Trixbox, 300.
Primary Server: choose Trixbox(1), the VoIP server template configured in
Step 2.
User Name: the extension username on Trixbox, 300.
Authentication Name: the extension authentication name on Trixbox, 9000.
Password: the authentication password of the extension on Trixbox,
pincode9000.
Dial Pattern Template: Choose the Dial Pattern Template,
DialPatternTemplate1(1).
Save and apply the changes, and you will see the port status is “Registered” on
"Port Status" page.
Path: Status→System Status→Port Status