Need help?Do you have a question about the Yeastar Technology NeoGate TG200 and is the answer not in the manual?
General| Power Supply | DC 12V/1A |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| GSM Channels | 2 |
| SMS Support | Yes |
| Network Interface | 10/100 Mbps Ethernet |
| Humidity | 10% to 90% non-condensing |
| Protocols | SIP |
| VoIP Protocols | SIP |
| Network Protocols | TCP, UDP, IP, HTTP, HTTPS, ARP, ICMP, DNS, DHCP |
| Voice Codecs | G.711 |
| LAN | 1 x 10/100 Mbps Ethernet |
Highlights the main functionalities and capabilities of the NeoGate GSM Gateway.
Details the physical characteristics and components of the NeoGate device.
Describes the ports and connectors found on the rear panel of the NeoGate.
Provides step-by-step instructions for correctly inserting a SIM card.
Guide to connecting the external GSM antennas for optimal signal reception.
Instructions for establishing a network connection using an Ethernet cable.
Details on how to connect the NeoGate unit to a power source.
Explains how to access the NeoGate's web-based administrative interface.
Covers the configuration parameters related to GSM modules and SIM cards.
Configuration options for integrating the NeoGate with VoIP services.
Detailed setup for SIP accounts, registration, and service providers.
Advanced SIP settings, including NAT traversal and registration timers.
Defines rules for directing outbound calls through specific GSM or VoIP trunks.
Sets up rules for routing incoming calls to appropriate destinations.
Configures the callback feature for initiating calls after a brief connection.
Allows users to block specific incoming or outgoing phone numbers.
Interface and instructions for sending SMS messages through the NeoGate.
Displays a log of all SMS messages that have been successfully sent.
Displays a log of all SMS messages that have been received.
Sets general system parameters and default values for various functions.
Configures firewall rules to protect the device from network threats.
Configures LAN, IP address, subnet mask, gateway, and DNS settings.
Instructions for changing the administrator password for system security.
Sets the device's current date, time, and time zone.
Manages system configuration backups and restores.
Procedures for rebooting the device or resetting to factory defaults.
Guides on updating the device's firmware for new features or fixes.
Provides detailed records of all call activities on the NeoGate.
Displays system hardware, firmware, and network status information.
Illustrates a direct connection scenario between SIP phones and GSM network.
Shows an application scenario involving an IPPBX, SIP phones, and GSM network.
To Next Page