Need help?Do you have a question about the Yeastar Technology TA800 and is the answer not in the manual?
General| Type | VoIP Gateway |
|---|---|
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 2.5 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Protocols | SIP |
| Transport Protocol | UDP, TCP |
| Codecs | G.711, G.729, G.726 |
| LAN | 1 |
| WAN | 1 |
| Humidity | 10% to 90% (non-condensing) |
Describes the process of accessing the TA FXS Gateway via web interface.
Provides details on the system's current status, including trunk and network status.
Allows checking call logs, system logs, and using packet tools for debugging.
Configures network settings like LAN, VLAN, and VPN.
Provides an overview of security configurations and rapid access to settings.
Configures system alerts for potential attacks via call or email.
Allows changing the administrator password for system access.
Configures the system's date, time, and timezone settings.
Lists all FXS ports and allows editing their configurations.
Configures VoIP server templates for FXS port registration.
Defines dial patterns for routing calls from FXS ports.
Configures General, NAT, Codecs, QoS, Response Code, T.38, and Advanced SIP settings.
Configures IAX settings for connecting to another IAX server.
Sets global preferences like ring timeout and max call duration.
Manages feature codes for gateway info and supplementary services.
Allows uploading and managing custom audio prompts.
Allows uploading and managing music on hold audio files.
Manages multilingual system prompts for the gateway.
Configures tone zone settings for different countries and regions.
Configures RADIUS settings for billing purposes.
Guides users on configuring network settings via an analog phone voice menu.
Explains how to make calls between phones connected to different FXS ports.
Describes how to place an active call on hold.
Explains how to manage incoming calls while on an active call.
Details blind and attended call transfer procedures.
Outlines the steps to establish a three-party conference call.
Describes making direct IP calls without a SIP proxy.
Guides on changing the device's IP address via an analog phone.
To Next Page