FXS Gateway TA400/800 User Manual
Figure 3-8 Static Route
1) Route Table
The current route rules of TA FXS Gateway.
2) Static Route Rules
You can add new static route rules here.
Table 3-5 Description of Static Route Settings
The destination network to be accessed to by TA FXS Gateway.
Specify the destination network portion.
Gateway
Define which gateway TA FXS Gateway will go thro
accessing the destination network.
Metric
The cost of a route is calculated by using what are called routing
metric. Routing metrics are assigned to routes by routing
protocols to provide measurable statistic which can be used to
judge how useful (how low cost) a route is.
Define which internet port to go through.
3.2 Security Center
3.2.1 Security Center
You can check TA FXS Gateway security configuration in “Security Center” page. And
also, you can enter the relevant security settings page rapidly.
15/59
To Next Page
Loading...
Need help?
General
