Yeastar Technology TA800 - 2.2.3 Packet Tool

FXS Gateway TA400/800 User Manual
• Enable Debug Log
Save debug information (up to 2 log files)
2.2.3 Packet Tool
This feature is used to capture packets for technician. Integrate packet capture tool
“Wireshark” in TA FXS Gateway.
Users also could specify the destination IP address and port to get the packets.
Figure 2-6 Packet Tool
• IP
Specify the destination IP address to get the packets.
• Port
Specify the destination Port to get the packets.
9/59