FXS Gateway TA400/800 User Manual
and make sure SMTP test is successful.
Figure 3-21 Email Settings
Table 3-11 Description of SMTP Settings
E-mail Address
The E-mail Address that TA FXS Gateway will use to
send voicemail.
The password for the email address used above
SMTP Server
The IP address or hostname of an SMTP server that
the TA FXS Gateway will connect to in order to send
voicemail messages via email, i.e.
SMTP Port: the default value is 25.
Use SSL/TLS to send
secure message to server
If the server of sending email needs to authenticate the
sender, you need to enable this
: Must be selected for Gmail or exchange server.
After filling out the above information, you can click on the “Test Account Settings”
button to check whether the setup is OK.
1) If the test is successful, you can use the email safely.
2) If test failed, please check if the above information is correct or if the network is
proper.
3.3.4 Auto Provision Settings
This feature is used along with MyPBX "NeoGate Provisioning". Users can configure
TA FXS Gateway on MyPBX "NeoGate Provisioning" page.
24/59
To Next Page
Loading...
Need help?
General
