FXS Gateway TA400/800 User Manual
3.2.3 AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in the
system, as well enabling you to request that Asterisk perform some action. The
actions that are available are wide-ranging and include things such as returning status
information and originating new calls. Many interesting applications have been
developed on top of Asterisk that take advantage of the AMI as their primary interface
to Asterisk.
There are two main types of messages on the Asterisk Manager Interface: manager
events and manager actions.
The 3
rd
party software can work with TA FXS Gateway using AMI interface. It is
disabled by default. If necessary, you can enable it.
Figure 3-13 AMI Settings
Username & password: after enabling AMI, you can use this username and
password to log in TA FXS Gateway AMI.
Permitted "IP address/Subnet mask": you can set which IP can log in TA FXS
Gateway AMI interface.
3.2.4 Certificates
TA FXS Gateway can support TLS trunk. Before you register TLS trunk to TA FXS
Gateway, you should upload certificates first.
19/59
To Next Page
Loading...
Need help?
General
