FXS Gateway TA400/800 User Manual
4.2.2 Dial Pattern Template
Dial pattern template specifying how to route the calls from FXS ports to VoIP server
extensions or external numbers. The number of dial pattern templates is limited by the
number of ports each TA FXS Gateway model has.
Figure 4-11 Dial Pattern Template
Table 4-5 Description of Dial Pattern Template Settings
The ID for this template.
A name for this template.
Dial Pattern
Calls from the FXS port should match the dial pattern set on this
template, or the call cannot be established. Hover the pointer over
to read tips.
Strip
Allows the user to specify the number of digits that will be stripped
from the front of the phone number before the call is placed.
Prepend
The digits will be appended to the phone number before the call is
placed.
DTMF Mode
Set default mode for sending DTMF of this trunk. Default setting:
rfc2833.
Define the codec for this sip trunk and its priority.
4.2.3 SIP Settings
This is the SIP settings in TA FXS Gateway, including General settings, NAT, Codecs,
Qos, Response Code, T.38, and advanced settings.
1) General
40/59
To Next Page
Loading...
Need help?
General
