Yeastar Technology TA800 User Manual

FXS Gateway TA400/800 User Manual
Figure 4-12 SIP General Settings
Table 4-6 Description of SIP General Settings
Items
Description
UDP Port
Port used for SIP registrations. The default is 5060.
Enable Random Port
Enable or Disable Random SIP port.
Random Port Update
Interval
Set the Random Port Update Interval.
TCP Port
Port used for SIP registrations. The default is 5060.
TLS Port
Port used for SIP registrations. The default is 5061.
TLS Verify Server
When using TA FXS Gateway as a TLS client, whether
or not to verify server’s certificate. It is “No” by default.
TLS Verify Client
When using TA FXS Gateway as a TLS server, whether
or not to verify client’s certificate. It is “No” by default.
TLS Ignore Common
Name
Set this parameter as “No”, then common name must be
the same with IP or domain name.
TLS Client Method
When using TA FXS Gateway as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
RTP Port Start
Beginning of the RTP port range.
RTP Port End
End of the RTP port range.
DTMF Mode
Set the default mode for sending DTMF. Default setting:
rfc2833
Max
Registration/Subscription
Time
Maximum duration (in seconds) of a SIP registration.
The default is 3600 seconds.
Min
Registration/Subscription
Time
Minimum duration (in seconds) of a SIP registration.
The default is 60 seconds.
41/59

Yeastar Technology TA800 Specifications

General

Brand	Yeastar Technology
Model	TA800
Category	Gateway
Language	English