FXS Gateway TA400/800 User Manual
Figure 3-22 MyPBX NeoGate Provisioning
Add NeoGate
Click “Add NeoGate” and fill in the corresponding information in the pop-up window.
Figure 3-23 General Settings
1) General
• MAC Address
Fill in the MAC address of the TA FXS Gateway.
• MAC Address
Select the TA FXS Gateway Type.
• Label
Fill in the name of the TA FXS Gateway.
• Key as Send
Configure a key as the send key, you can choose #, * or disable this feature.
2) Codecs
In this page, you can set the codecs for the TA FXS Gateway.
25/59
To Next Page
Loading...
