EasyManua.ls Logo

Yeastar Technology NeoGate TG100 User Manual

Yeastar Technology NeoGate TG100
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NeoGate TG Series Installation Guide
http://www.yeastar.com 1/14
NeoGate TG Series Installation
Guide
Version: V1.1
Yeastar Technology Co., Ltd.
Date: Sept. 2, 2014
Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology NeoGate TG100 and is the answer not in the manual?

Yeastar Technology NeoGate TG100 Specifications

General IconGeneral
Product TypeVoIP GSM Gateway
GSM Channels1
FrequencyGSM 850/900/1800/1900 MHz
ProtocolsSIP
Network Interface10/100Mbps Ethernet
AntennaExternal antenna
Network ProtocolsTCP/IP
Operating Temperature0°C to 40°C
Storage Temperature-20 to 70 °C
Humidity10% to 90% non-condensing

Summary

Preparation before Installation

Hardware Specifications

Overview

General overview of the NeoGate TG Series hardware, including visual representation.

LED Indicators and Ports

Explanation of LED indicators and hardware ports on the front and rear panels.

Specifications and Operating Environment

Technical specifications and environmental operating conditions for NeoGate TG models.

NeoGate TG Series Installation

Placement Instructions

Guidance on where to place the NeoGate TG Series device for optimal performance and safety.

Connection of Ethernet Ports

Instructions for connecting the NeoGate TG Series Ethernet LAN port to a network.

Connection of GSM ports

Steps for connecting SIM cards and antennas to the GSM ports of the NeoGate TG Series.

Power Connection

Guide on how to connect the power adapter to the NeoGate TG Series device.

Indicators Status

Understanding the status of Power, RUN, and GSM port indicators after connection.

NeoGate TG Series Basic Configurations

Factory Defaults

Details on default IP address, username, and password for accessing the web interface.

Logging in the Web Configuration Panel

Steps to access and log into the NeoGate Web Configuration Panel.

Network Settings

Configuration of IP addresses for the LAN port via the web interface.

Make and Receive calls

Information on setting up the NeoGate TG Series to make and receive calls.

Reset to Factory Defaults

Instructions on how to reset the NeoGate TG Series to its original factory settings.

Conclusion

Related product manuals