NeoGate TG Series Installation Guide
http://www.yeastar.com 11/14
3.2.3 Power Connection
Once users have made sure that device installation, cable connection and power type are correct, please
switch on the power. Then NeoGate will start booting. In the meantime, users would see that the “POWER”
and “RUN” indicator lights turn on.
Please switch off the power before plugging or unplugging the cables.
3.2.4 Indicators Status
When power is connected, users should be able to find that the “Power” indicator, “RUN” indicator, and GSM
port status indicator beside the slot that has installed SIM cards turn on.
To Next Page
Loading...
