EasyManuals Logo

Yeastar Technology NeoGate TG100 User Manual

Yeastar Technology NeoGate TG100
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
NeoGate TG Series Installation Guide
http://www.yeastar.com 12/14
4. NeoGate TG Series Basic Configurations
4.1 Factory Defaults
NeoGate TG Series provides web-based configuration interface for administrator and account user. The user
can manage the device by logging in the Web interface.
The factory default IP address:
LAN: 192.168.5.150;
Access path: http://[IP address]
User Name: admin;
Password: password
Default SIP UDP port: 5060
4.2 Logging in the Web Configuration Panel
Firstly, please check if the IP address that assigned to the network port (LAN) is in the same segment with the
PC and which can be connected when commitPing + NeoGate IP address” command. Start the browser on
PC. In the address bar, enter the IP address, clickEnterbutton and then you can see NeoGate Web
Configuration Panel login page (See Figure 4-1).
Figure 4-1 NeoGate Web Configuration Panel Login Page
Enter the Admin User Name and Password to log in.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology NeoGate TG100 and is the answer not in the manual?

Yeastar Technology NeoGate TG100 Specifications

General IconGeneral
BrandYeastar Technology
ModelNeoGate TG100
CategoryGateway
LanguageEnglish

Related product manuals