EasyManuals Logo

Yeastar Technology NeoGate TG200 User Manual

Yeastar Technology NeoGate TG200
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
NeoGate User Manual
www.yeastar.com 27
Enable this item, net ping from remote hosts will be dropped.
·Drop All
When you enable Drop Allfeature, system will drop all packets or connection
from other hosts if there are no other rules defined. To avoid locking the devices,
at least one ‘TCP’ accept common rule must be created for port used for SSH
access, port used for HTTP access and port sued for CGI access.
3.6.3 Network Setting
1) LAN
·DHCP
If this option is set, NeoGate will use DHCP to get an available IP address
from your local network. Not recommended.
·Enable SSH
This is the advance way to access the device, you can use the putty software
to access the device. In the SSH access, you can do more advance setting
and debug.
·Port: the default is 8022,
·Hostname
Set the host name for NeoGate.
·IP Address
Set the IP Address for NeoGate.
·Subnet Mask
Set the subnet mask for NeoGate.
·Gateway
Set the gateway for NeoGate.
·Primary DNS
Set the primary DNS for NeoGate.
·Secondary DNS
Set the secondary DNS for NeoGate.
2) Advanced Settings
A VLAN is a logical local area network (or LAN) that extends beyond a single

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology NeoGate TG200 and is the answer not in the manual?

Yeastar Technology NeoGate TG200 Specifications

General IconGeneral
BrandYeastar Technology
ModelNeoGate TG200
CategoryGateway
LanguageEnglish

Related product manuals