Yeastar Technology NeoGate TG200 User Manual

NeoGate User Manual
www.yeastar.com 13
Figure 3-7
3.3.2 Advanced Settings
1) General
·Transport
This will be the transport method used by devices. The options are UDP (default)
or TCP.
·UDP Port
Port use for sip registrations, Default is 5060.
·TCP Port
Port use for sip registrations, Default is 5060.
·RTP Port Start
Beginning of RTP port range
·RTP Port End
End of RTP port range
·DTMF Mode
Set default mode for sending DTMF. Default setting: rfc2833
·Max Registration/Subscription Time

Yeastar Technology NeoGate TG200 Specifications

General

Brand	Yeastar Technology
Model	NeoGate TG200
Category	Gateway
Language	English