To Next PageTo Next PageWhy yellow jacket TITAN P51-870 manifold is not holding pressure or vacuum?
The manifold might not be holding pressure or vacuum because the knobs are open; check their position. The manifold could also be damaged or leaking, requiring you to call technical support. Another possibility is that the hose connections are not tightened properly; check these connections.
How to brighten dimmed screen on yellow jacket Measuring Instruments?
If the screen has dimmed, tap the power button to power on the backlight. If the screen is damaged, it is suggested to contact technical support.
What causes incorrect or missing vacuum reading on yellow jacket TITAN P51-870 Measuring Instruments?
An incorrect or missing vacuum reading may occur if the vacuum probe barrel connector is not fully seated in the back of the manifold; check these connections. The vacuum probe/cable or jacks could also be damaged, requiring you to call technical support. Ensure the probe is properly attached to the system and, for P51-870 models only, that the vacuum probe is plugged into the A1 or A2 jacks.
Why is temperature reading incorrect or not displaying on yellow jacket Measuring Instruments?
The temperature reading may be incorrect or not displaying because the temperature clamp barrel connector is not fully seated in the back of the manifold; check these connections. It could also be due to a damaged temperature clamp/cable or damaged temperature clamp jacks, in which case you should call technical support. Ensure the clamp is properly attached to the system and that T1 is attached to the system low-side and T2 to the system high-side. For P51-860 models only, ensure Tsy mode is selected.
What to do if pressure readings are incorrect on yellow jacket TITAN P51-870?
If the pressure readings are incorrect, make sure the pressure transducers are zeroed before use. If the issue continues, it is possible the pressure transducers are damaged, and you should contact technical support.
How to establish Bluetooth connection with yellow jacket TITAN P51-870 Measuring Instruments?
To establish a Bluetooth connection, ensure the P51 manifold is powered on and that Bluetooth is enabled on your mobile device. The ManTooth app must be version 3.0 or newer. For Android devices, pair the manifold with your mobile device using the Bluetooth settings utility. Also, ensure the manifold and mobile device are within range (~400 ft).
How to fix yellow jacket Measuring Instruments when it is not recognized when connected to PC?
First, check the USB connection to both the P51 manifold and the PC. Ensure the P51 manifold is powered on for data transfer. If the issue persists, try using an alternate USB cable. If none of these steps work, it is possible the manifold is damaged, and you should contact technical support.
What to do if yellow jacket Measuring Instruments manifold is not charging and LED is not solid green?
If the manifold isn't charging and the LED isn't solid green, check the USB connection to both the P51 manifold and the power source. Also, try using an alternate USB cable. Note that if the device is fully charged, no action is required. If these steps don't resolve the issue, it is possible the manifold is damaged, and you should contact technical support.
General| Brand | yellow jacket |
|---|---|
| Model | TITAN P51-870 |
| Category | Measuring Instruments |
| Language | English |
Information on reaching the manufacturer for support or orders.
Guidelines and warnings to prevent injury or damage during use.
Identifies and describes the main components and features of the device.
Instructions for powering the device on and off.
Explains how to use the touchscreen and navigate the interface.
Details how to connect and use the temperature probes for measurements.
Instructions for connecting and using the vacuum sensor for measurements.
Explains how to read and understand the battery status indicator.
Provides steps for charging the device's battery.
Information on adjusting display brightness and backlight settings.
Explains the process of recording and saving system data.
Explains the various colors and patterns of the device's LED indicator.
Overview of the main operating modes available on the device.
Details the Pressure/Temperature mode for system analysis.
Explains how to read and understand the pressure gauges on the display.
Describes how to interpret the graphical display of pressure and temperature data.
Guide to using the Pressure/Temperature mode and its settings.
Details the Evacuation mode for monitoring vacuum levels.
Explains how to read the vacuum gauge in Evacuation mode.
Describes how to interpret the graphical display for evacuation data.
Instructions for using the Evacuation mode and setting parameters.
Explains the Pressure Decay test for monitoring system leaks.
How to read the pressure gauge during a decay test.
How to interpret the graph for pressure decay test results.
Instructions for setting up and running the Pressure Decay test.
Explains the Pressure Rise test for monitoring vacuum changes.
How to read the vacuum gauge during a pressure rise test.
How to interpret the graph for pressure rise test results.
Instructions for setting up and running the Pressure Rise test.
Overview of the different settings menus available on the device.
Access to options like refrigerant, units, and transducer zeroing.
Procedure for re-zeroing pressure transducers for accuracy.
Instructions for recalibrating the touchscreen for better responsiveness.
How to select and change the refrigerant type used by the device.
How to adjust pressure, vacuum, and temperature units.
Details available pressure units and how to change them.
Details available temperature units and how to change them.
Details available vacuum units and how to change them.
Access to settings like brightness, backlight, and auto-off.
Adjusting the display backlight intensity.
Setting the duration the backlight stays on.
Configuring the automatic power-off feature.
Adjusting the frequency of data sample storage.
Introduction to the Mantooth app and its compatibility.
Instructions for pairing and using the Mantooth app with the device.
Introduction to basic maintenance procedures.
Guidelines for cleaning and maintaining the instrument.
List of available replacement parts with UPC numbers.
Information on how to obtain and install software updates.
Lists physical dimensions, weight, and battery life.
Lists technical performance specs like pressure, temp, vacuum ranges.
Lists common problems, causes, and solutions for the P51-870.
