Yepzon One 2.0 - Adding More Users; Requesting a Reset Link; Device Durability

4
1.4 Adding more users
Use the Yepzon App to share the access to your Yepzon with another smartphone or
tablet.
1. Open the Yepzon App.
2. Select the Yepzon device.
3. Select Settings.
4. Select Manage access rights.
5. Select Add user and follow the instructions for sharing the access.
Note: The new user will receive a message that contains both a download link for
Yepzon™ App and pairing link for the tracker. Pairing link expires aer 24 hours.
1.5 A recommended precaution: Requesting a reset link
A recommended precaution is to request a reset link from the Settings. You will need
the reset link if you suddenly don’t have access to your phone anymore or you
accidentally delete the app. Requesting a reset link sends you an e-mail message
with a link that can be used to remove all the users. Aer removing all the users you
can pair the tracker again. Your e-mail address is not collected, saved or used by
Yepzon for anything else than sending the reset link.
1. Open the Yepzon App.
2. Select the Yepzon device.
3. Select Settings.
4. Select Create a restore link.
5. Enter your e-mail address and select Send.
6. Keep the e-mail with the reset link saved for when you need it.
1.6 Durability
The Yepzon ONE 2.0 is shockproof and waterproof (IP67).
If your Yepzon device is continuously in contact with water or used in humid
conditions, we recommend weatherproofing it.
Please note that factory guarantee does not apply if breakage is due to using the
tracker in extreme conditions.