6
International use
If you want to use your tracker outside EU, USA, Russia or China, you must buy a
roaming package via the app or yepzon.com/roaming. Price depends on country and
length of visit.
Note: Please check yepzon.com/roaming for covered countries.
2.4 Power o and restore
Turn o the Yepzon
The Yepzon device can only be turned o from the Yepzon App. This is only required
in rare circumstances (e.g. during flight).
Note: Aer shutdown, the tracker must be plugged in to charge to turn back on.
Create restore link
You can request a restore link that enables you to reset your Yepzon. The reset simply
removes all the connections between Yepzon and any smartphone or tablet it has
been connected to. Your e-mail address is not collected, saved or used by Yepzon for
anything else than sending the reset link.
3 Location
3.1 Locate accurately
Yepzon One 2.0 uses GSM, GPS and Wi-Fi for positioning.
By default, the app always displays the last known location based on either GSM cell
towers or Wi-Fi hotspots.
Yepzon One 2.0 locates accurately on demand. To activate the GPS/Wi-Fi positioning,
tap Locate accurately. Time for accurate positioning to start depends on connection
interval settings. The waiting time is the connection interval at maximum. Each
session lasts for a few minutes and can be repeated sequentially as many times as
needed.
If GPS signal is not strong enough (e.g. indoors) and Wi-Fi hotspots are not present, a
rough position based on GSM towers is shown.
Example: Connection interval is 5 minutes. The last connection was at 12:00. The user
taps the Locate accurately button at 12:01. Yepzon starts tracking aer four minutes,
at 12:05.
To Next Page
Loading...