8. 9.
THE LOWDOWN ON THE
SB5.5 AND ITS FEATURES.
1. The SB5.5 delivers 5.5 inches (140mm) of travel with our patented
Switch Innity Technology. Efcient pedaling performance while still
smooth and continuous when the going gets rough.
2. High modulus carbon provides a stiff, strong and light weight
chassis.
3. Colleted pivot axles help create a stiff interface between the
front and rear triangles of the frame. Custom Enduro Max sealed
bearings keep things moving freely at the pivots.
4. The SB5.5 does away with the front derailleur mount, making it a 1x
drive specic frame. This increases stiffness in the frame, making
the SB5.5 one of the stiffest bikes in our lineup.
5. ISCG 05 chain guide mounts are included on the SB5.5 if case you
want to go for some extra drivetrain security in the rowdy sections.
6. Using our inset head tube on the SB5.5 allows for a larger head
tube with more area, increased stiffness, and lower overall ride
height without compromising any performance.
7. The SB5.5 uses a 2.25 inch stroke, 7.875 inch eye to eye DPX2
EVOL shock, by Fox Racing Shox.
8. Custom guards on the seat stay, chain stay and down tube keep
things quiet while riding and protect the frame.
9. The SB5.5 features internal routing for all cables, making the bike
quiet and clean looking as well as reducing cable rub on the paint.
10. Dedicated 12 x 148 Boost dropouts and integrated hanger with
axle threads for strength, stiffness, ease of hanger and wheel
installation.
1. SWITCH INFINITY TECHNOLOGY PATENTED SUSPENSION SYSTEM
2. HIGH MODULUS CARBON FIBER MAIN FRAME AND SWING ARM
3. COLLET AXLE SYSTEM ON PIVOTS REDUCES BEARING WEAR
4. OPTIMIZED FOR 1X DRIVETRAINS ONLY
5. ISCG 05 CHAINGUIDE MOUNTS
6. TAPERED INSET HEAD TUBE (44MM/56MM)
7. SUSPENSION BY FOX
8. CUSTOM DEBRIS AND CHAIN SLAP GUARDS
9. INTERNAL CABLE ROUTING
10. INTEGRATED AXLE AND DERAILLEUR HANGER SYSTEM
To Next Page
Loading...
