Need help?Do you have a question about the Yeti SB5 and is the answer not in the manual?
General| Frame Material | Carbon Fiber |
|---|---|
| Wheel Size | 27.5 inches |
| Rear Travel | 127 mm |
| Front Travel | 150 mm |
| Drivetrain | 1x12 |
| Brake Type | Hydraulic Disc |
| Suspension | Full Suspension |
| Intended Use | Trail |
Congratulates the user on their new Yeti and highlights its quality and performance.
Covers Switch Infinity, collet axles, internal routing, and integrated hanger for performance.
Details Turq/Carbon frames, 1x optimization, head tube, and frame guards.
Highlights Fox suspension integration and industry-leading low stand over height.
Provides rider height recommendations for selecting the correct frame size from XS to XL.
Offers guidelines for maintaining bicycle performance and preventing issues.
Details weekly, monthly, and annual tasks for keeping the Yeti in top condition.
Lists essential torque values for frame assembly and component adjustments.
Provides tips for inspecting the shock and lists necessary tools for setup.
Offers baseline settings for sag, rebound, and compression adjustment.
Details how to adjust air pressure to achieve the recommended 15mm sag.
Guides on tuning rebound speed and low-speed compression for optimal feel.
Lists tools and provides tips for setting up the DPX2 shock for the Lunch Ride kit.
Provides baseline settings for sag, rebound, and compression for the DPX2 shock.
Details setting air pressure to achieve 16mm sag for the DPX2 shock.
Guides on adjusting rebound and compression for the DPX2 shock.
Highlights the reverse threaded nature of the hanger cap and inspection advice.
Lists the 6mm Allen key and grease needed for installation.
Details the process of prepping, seating, and torquing the derailleur hanger.
Explains the routing of the rear derailleur housing from the head tube to the swing arm.
Describes the routing of the rear brake housing along the chain stay.
Guides on routing the dropper post cable through the frame's internal channel.
Lists necessary tools and emphasizes prepping bolt threads for frame assembly.
Details installing the Switch Infinity Link with bolts, washers, and Loctite.
Guides on tightening Infinity Link bolts using a torque wrench.
Covers greasing bearing surfaces and installing pivot axles and nuts.
Details installing main pivot axles, nuts, and upper link pivot pins.
Guides on mounting the shock and securing it with bolts and washers.
Outlines the terms and conditions of the five-year limited frame warranty.
Specifies conditions that void the warranty and general disclaimers.
Details the policy for replacement parts availability after a crash.
Explains frameset useful life and recommends annual stress inspections.
To Next Page
