8. 9.
THE LOWDOWN ON THE
SB5 AND ITS FEATURES.
1. The SB5 delivers 5 inches (127mm) of travel with our patented
Switch Innity Technology. Ecient pedaling performance while still
smooth and continuous when the going gets rough.
2. Top of the top Turq Series frames and our Carbon series both oer
the same geometry and eciency in all models.
3. Colleted pivot axles help create a sti interface between the front
and rear triangles. Custom Enduro Max sealed bearings keep
things moving freely at the pivots.
4. The SB5 does away with the front derailleur mount, making it a 1x
drive specic frame. This increases stiness in the frame, making
the SB5 one of the stiest bikes in our lineup.
5. ISCG 05 chain guide mounts are included on the SB5 in case you
want to go for some extra drivetrain security for the rowdy sections.
6. Using our inset head tube on the SB5 allows for a larger head tube
with more area, increased stiness, and lower overall ride height
without compromising any performance.
7. The SB5 uses a 50mm stroke, 210mm eye to eye Float EVOL shock
or DPX2 shock (Lunch Ride build), by Fox Racing Shox.
8. Custom guards on the seat stay, chain stay and down tube keep
things quiet while riding and protect the frame.
9. The SB5 features internally molded routing tubes for all cables,
making the bike quiet and clean looking as well as reducing
maintenance and cable rub.
10. Dedicated 12 x 148 Boost dropouts and integrated hanger with
axle threads for strength, stiness, ease of hanger and wheel
installation.
11. An already low stand over is made even lower in our small and
extra small SB5 frames, giving them the lowest stand over
clearance in the trail bike world.
1. SWITCH INFINITY TECHNOLOGY PATENTED SUSPENSION SYSTEM
2. TURQ AND CARBON SERIES FRAMES
3. COLLET AXLE SYSTEM ON PIVOTS REDUCES BEARING WEAR
4. OPTIMIZED FOR 1X DRIVETRAINS ONLY
5. ISCG 05 CHAINGUIDE MOUNTS
6. TAPERED INSET HEAD TUBE (44MM/56MM)
7. SUSPENSION BY FOX (50MM X 210MM)
8. CUSTOM DEBRIS AND CHAIN SLAP GUARDS
9. INTERNALLY MOLDED CARBON CABLE ROUTING TUBES
10. INTEGRATED AXLE AND DERAILLEUR HANGER SYSTEM
11. INDUSTRY LEADING LOW STAND OVER
To Next Page
Loading...
Need help?
General
