Need help?Do you have a question about the Yeti ARC and is the answer not in the manual?
General| Suspension Type | Hardtail |
|---|---|
| Frame Material | Carbon |
| Wheel Size | 29 inches |
| Brake Type | Disc |
| Drivetrain | 1x12 |
| Fork | Fox |
| Rear Derailleur | SRAM |
| Brakes | SRAM |
| Weight | 10.5 kg |
Cutting-edge, high modulus carbon is hand laid to create the frame for optimal stiffness and efficiency.
The frame is made of high modulus carbon fiber and is designed for a 1x drive specific setup.
Features 2-bolt ISCG-05 mounts for additional drivetrain security in rough terrain.
Designed for a 130mm travel fork, it features an integrated 41mm/52mm tapered headtube.
Designed with rattle-free cable ports and internal routing for a quiet and clean ride.
Features internally molded tubes for hassle-free cable routing and a quiet riding experience.
Equipped with 12x148mm Boost dropouts and SRAM's universal derailleur hanger for strength and easy installation.
Recommends using a torque wrench and lists specific torque values for frame parts.
Grease and install downtube bolts with washers to the frame, torquing to 4-5 Nm.
Install cable port covers into the recesses behind the head tube.
Secure drive-side port clamp with M4 x 25L screws, torquing to 2-3 Nm.
Assemble lower port clamp to down tube port cover using an M4 screw, torquing to 2-3 Nm.
Install the down tube port cover with an M4 x 16L screw, torquing to 3 Nm.
Secure the chainstay cable port cover with an M4 x 10L screw, torquing to 2-3 Nm.
Install the universal hanger into the frame, noting the reverse-threaded cap bolt. Torque to 25 Nm.
Ensure dropper fits frame without interference and allows desired BB-Saddle measurement.
Chart showing maximum wireless dropper insertion depth (MM) for various frame sizes.
Details the components included in the master rebuild kit for the Arc frame.
Specifies the recommended fork travel (130mm) and maximum allowable travel (150mm).
Details PF92 bottom bracket standard and compatible crank types.
Specifies the required rear wheel axle type (SRAM Universal Derailleur Hanger, 12x148mm).
Covers manufacturing defects for original purchasers; paint/finish for 1 year. Registration required.
To Next Page
