YI Technologies YI 360 VR - Recording; Preparing to Record

3.4!System!Settings!
3.4.1!Standard:!NTSC/PAL*
3.4.2!Wi-Fi!Info!
Tap!the!‘Wi-Fi!Info’!bar!to!see!the!Wi-Fi!SSID!and!Wi-Fi!password.!
3.4.3!Wi-Fi!Channel*
You!can!set!the!volume!for!the!sound!indicator!to!be!High!(default),!Low!or!Mute!
3.4.4!LEDs*
You!can!switch!the!light!indicator!on/off.!
!
If!the!switch!is!on!(defau lt),!wh en! the !cam era!is!recording,!the!status!lights!will!be!red!and!
flash.!Whe n !the!camera!is!don e,!th e !re d !sta tu s !lig ht !w ill!b e !so lid .!
!
3.4.5!Beep:!High/Low/Mute!
!
3.4.6!Language:!CN/EN!
3.4.7!Format!SD!Cards*
3.4.8!Reset!camera*
With!this!setting,!you!can!reset!the!camera!to!their!default!settings.!
3.4.9!Auto!Power!Off!
With!this!setting,!you!can!set!the!time!to!auto!power!off.!The!va lue!is!set!to!‘3m ins’!by !
default.!
4.!Recording!
This!section!explains!the!recording!basics.!
4.1!Preparing!to!Record!
1.!Make!sure!there!is!a!microSD!card!in!the!camera.! !
2.!Power!on!the!camera.!
3.!Con fir m!the!cur r e n t !c a mera!mo de.!
4.!Adju s t !se t t in g s .!