6. MACHINE SAFETY INFORMATION
45
6.1 Lifting, installation, electric maintenance of the machine should be carried out by qualified personnel only.
6.2 Routine maintenance and scheduled maintenance should be carried out by qualified personnel after unplugging the
machine first.
6.3 Ensure that the machine has been cleaned, tested and maintained before starting to operate it.
6.4 Check the safety devices, power cable and moving parts regularly. Don’t operate the machine before having replaced
defective safety devices or faulty parts.
6.5 Never replace the milling cutters before unplugging first.
6.6 Keep foreign materials away from the working area of the machine, keep away from the machine’s moving parts.
6.7 Do not work on the machine by removing the protective parts.
The safety data have been defined above. In order to prevent physical damage or damage to
the equipment, please read the safety information carefully and keep the manual always in
an easy accessible place !...
To Next Page
