Need help?Do you have a question about the YOKOGAWA AXG080 and is the answer not in the manual?
General| Type | Electromagnetic Flowmeter |
|---|---|
| Lining Material | PTFE |
| Accuracy | ±0.5% of reading |
| Repeatability | ±0.1% of reading |
| Nominal Size | 80 mm |
| Process Connection | Flange |
| Fluid Temperature | -40 to 120°C |
| Output Signal | 4-20 mA, HART |
| Power Supply | 24 VDC |
| Communication | HART |
| Enclosure Rating | IP67 |
| Operating Temperature | -20 to 60°C |
| Measurement Range | 0 to 10 m/s |
| Protection Class | Ex d IIC T6 |
Lists applicable standards, certificates, and technical specifications for explosionproof flowmeter types.
Describes cable entry types, markings, screw sizes, and grounding terminal locations for flowmeters.
Covers wiring compliance, unused apertures, sensor insulation, hazardous location wiring, and grounding requirements.
Provides guidance on safe operation, avoiding sparks, and specific handling instructions for opening covers.
States that only authorized Yokogawa Electric Corporation personnel can repair the equipment.
Outlines conditions for titanium parts, electrostatic charges, temperature/ambient ranges, and installation categories.
To Next Page
